TOGU TG-6016 48" Stainless Steel Push Pull Door Handle - H-Shape/Ladder Style Back to Back Design for Solid Wood, Timber, Glass & Steel Doors - Brushed Finish | Perfect for Commercial Entrances, Office Buildings & Modern Home Interiors

Brand: TOGU Material: 100% 1.0mm thickness Premium Grade-304 Stainless Steel Finish: Full Brushed Stainless Steel Total length: 1500mm / 60 inches Cross-Section Specification: 32mm or 1.26 inches Center-to-Center Mounting Distance: 1200mm/47.24 inches Attention: If you are purchasing new handles for the replacement of the old ones, please kindly measure the existing hole-to-hole Distance, the allowable tolerance is 1200mm/47.24 inches ¡À1mm/0.04inches. If you are not sure, please kindly consult us. Thank you! Applicable door thickness: 2 pieces of Backup 80mm Connection Spindle Screws make the 300mm/12inches Length Size works up to door thickness 55mm/2.165inches 2 pieces of Backup 80mm Connection Spindle Screws and 2 pieces of 100mm Connection Spindle Screws make the 450mm/18inches & 600mm/24inches & 900mm/36inches & 1200mm/ 48inches & 1500mm/ 60inches & 1800mm/ 71inches Length Size works up to door thickness 75mm/2.95inches If your door thickness is not in this thickness range, please kindly get in touch with us! We will try our best efforts to offer you a best solution! Steps for Installation: Drill and create two end to end holes diameter between 10mm-12mm/0.394-0.472 inches on the door with a Center-to-Center Mounting Distance. Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls. Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process.

1. Quality 1mm thick, high-endurance 304-grade stainless steel for rust, stain, and corrosion resistance, Solid Premium Grade-304 Connection base and spindle screws leads for a very long durability and lifespan.

2.The ladder style H-shape is finished in perfect smooth brushed stainless steel and has a length of 1500mm/60inches , hole to hole distance 1200mm/47.24 inches , Cross-Section Specification 32mm/1.26inches to fit most doors up to door thickness 2.95 inches.

3.All accessories (Allen wrench, spare set screws) included, very easy installation.

4. Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.

5. Applications: Entry/Entrance door handle, wood or glass door pulls, interior/exterior front doors, shops, shower bathroom, kitchen cabinets, gate, wine cellars, barn sliding door knob from small to large/big, please kindly note TOGU door handles/pulls itself do NOT lock and is used in conjunction with deadbolts hardware and/or door catches.